Interoperability for Enterprise Software and Applications

Within the framework of the Sixth I-ESA International Conference, supported by the INTEROP VLab (International Virtual Laboratory on Enterprise Interoperability, http://www.interop-vlab.eu), three workshops and a Doctoral Symposium have been organized in order to strengthen some key topics related to interoperability for enterprise applications and software. The workshops were selected to complement the conference topics, leaving more time to researchers for brainstorming and then coming up, at the end of the workshops, with new research directions for the future. The goal of the workshop “Standards – a Foundation for Interoperability” is to increase awareness and understanding of interoperability standards as a fundamental need. The workshop “Use of MDI/SOA Concepts in Industry” promotes the application of MDI (Model-Driven Interoperability) combined with SOA (Services Oriented Architecture) and the associated technology (BPM, Enterprise Modeling, ontology, mediation, model transformation, etc.) in industry. The workshop on “Dynamic Management across Interoperating Enterprises” investigates the need for enhancements to current business management systems and processes to address the needs of global trading across enterprises utilizing the new service-oriented Internet. Finally, the Doctoral Symposium has given the opportunity for students involved in the preparation of their PhDs in this emerging area to present and discuss their research issues and ideas with senior researchers.

The ability of future industry to create interactive, flexible and always-on connections between design, manufacturing and supply is an ongoing challenge, affecting competitiveness, efficiency and resourcing. The goal of enterprise interoperability (EI) research is therefore to address the effectiveness of solutions that will successfully prepare organizations for the advent and uptake of new technologies. This volume outlines results and practical concepts from recent and ongoing European research studies in EI, and examines the results of research and discussions cultivated at the I-ESA 2018 conference, “Smart services and business impact of enterprise interoperability”. The conference, designed to encourage collaboration between academic inquiry and real-world industry applications, addressed a number of advanced multidisciplinary topics including Industry 4.0, Big Data, the Internet of Things, Cloud computing, ontology, artificial intelligence, virtual reality and enterprise modelling for future “smart” manufacturing. Readers will find this book to be a source of invaluable knowledge for enterprise architects in a range of industries and organizations.

The ability of future industry to create interactive, flexible and always-on connections between design, manufacturing and supply is an ongoing challenge, affecting competitiveness, efficiency and resourcing. The goal of enterprise interoperability (EI) research is therefore to address the effectiveness of solutions that will successfully prepare organizations for the advent and uptake of new technologies. This volume outlines results and practical concepts from recent and ongoing European research studies in EI, and examines the results of research and discussions cultivated at the I-ESA 2018 conference, “Smart services and business impact of enterprise interoperability”. The conference, designed to encourage collaboration between academic inquiry and real-world industry applications, addressed a number of advanced multidisciplinary topics including Industry 4.0, Big Data, the Internet of Things, Cloud computing, ontology, artificial intelligence, virtual reality and enterprise modelling for future “smart” manufacturing. Readers will find this book to be a source of invaluable knowledge for enterprise architects in a range of industries and organizations.

Interoperability of enterprises is one of the main requirements for economical and industrial collaborative networks. Enterprise interoperability (EI) is based on the three domains: architectures and platforms, ontologies and enterprise modeling. This book presents the EI vision of the “Grand Sud-Ouest” pole (PGSO) of the European International Virtual Laboratory for Enterprise Interoperability (INTEROP-VLab). It includes the limitations, concerns and approaches of EI, as well as a proposed framework which aims to define and delimit the concept of an EI domain. The authors present the basic concepts and principles of decisional interoperability as well as concept and techniques for interoperability measurement. The use of these previous concepts in a healthcare ecosystem and in an extended administration is also presented.

In a fast changing global economy governed by Enterprise Services and the Future Internet, enterprises and virtual factories will self-organize in distributed, interoperable, innovation Ecosystems where the issues of Enterprise Interoperability need to be solved in a multi-view of information, services and processes throughout Enterprise Networks. The book constitutes the proceedings of five workshops co- located with the Fifth IFIP Working Conference IWEI 2013. It contains the presented peer reviewed papers and summaries of the workshop discussions. Complementing the IWEI Conference program, the workshops aimed at exploiting new issues, challenges and solutions for Enterprise Interoperability and Manufacturing Eco Systems. The scope of the workshops spanned over a range of interoperability issues in Service Science and innovation, Model Driven Service Engineering Architectures, Service Modelling Languages, reference ontology for manufacturing , Case studies and tools particularly for SMEs, Business – IT alignment and related Standardization. Contents 1 – Model Driven Services Engineering Architecture (MDSEA): A Result of MSEE Project An Architecture for Service Modelling in Servitization Context: MDSEA, Y. Ducq. A Set of Templates for MDSEA, D. Chen. 2 – Interoperability to Support Business–IT Alignment Report Workshop 2, I.-S. Fan, V. Taratoukhine, M. Matzner. Interoperability as a Catalyst for Business Innovation, J.H.P. Eloff, M.M. Eloff, M.T. Dlamini, E. Ngassam, D. Ras. Process-Oriented Business Modeling – An Application in the Printing Industry, A. Malsbender, K. Ortbach, R. Plattfaut, M. Voigt, B. Niehaves. A Comparative Study of Modelling Methodologies Using a Concept of Process Consistency, E. Babkin, E. Potapova, Y. Zelenova. Maintenance Support throughout the Life-Cycle of High Value Manufacturing Products. Interoperability Issues, A. Fedotova, V. Taratoukhine, Y. Kupriyanov. Using Enterprise Architecture to Align Business Intelligence Initiatives, I.-S. Fan, S. Warner. Towards Enterprise Architecture Using Solution Architecture Models, V. Agievich, R. Gimranov, V. Taratoukhine, J. Becker. 3 – Standardisation for Interoperability in the Service-Oriented Enterprise Report Workshop 3, M. Zelm, D. Chen. Standardisation in Manufacturing Service Engineering, M. Zelm, G. Doumeingts. Service Modelling Language and Potentials for a New Standard, D. Chen. An Approach to Standardise a Service Life Cycle Management, M. Freitag, D. Kremer, M. Hirsch, M. Zelm. Open Business Model, Process and Service Innovation with VDML and ServiceML, A. J. Berre, H. De Man, Y. Lew, B. Elves?ter, B.M. Ursin-Holm. Reference Ontologies for Manufacturing, R. Young, N. Hastilow, M. Imran, N. Chungoora, Z. Usman, A.-F. Cutting-Decelle. Standardisation Tools for Negotiating Interoperability Solutions, T. Santos, C. Coutinho, A. Cretan, M. Beca, R. Jardim-Goncalves. 4 – Case Studies on Enterprise Interoperability: How IT Managers Profit from EI Research Report Workshop 4, S. Kassel. Experiences of Transferring Approaches of Interoperability into SMEs, F. Gruner, S. Kassel. 5 – Selected New Applications of Enterprise Interoperability . 179 Report Workshop 5, L. Ferreira Pires, P. Johnson. Service-Oriented Enterprise Interoperability in Logistics, W. Hofman. An Ontological Approach to Logistics, L. Daniele, L. Ferreira Pires. Social Vision of Collaboration of Organizations on a Cloud Platform, A. Montarnal, W. Mu, F. B?naben, A.-M. Barthe-Delano?, J. Lamothe. Semantic Standards Quality Measured for Achieving Enterprise Interoperability: The Case of the SETU Standard for Flexible Staffing, E. Folmer, H. Wu. Re

In a fast changing world governed by innovative Enterprise Services and the Future Internet, the issue of Enterprise Interoperability is no longer limited to the interoperation of systems within a single company, but has become a much greater multi-view issue of interoperability throughout a Network of Enterprises. This book contains the proceedings of 13 workshops presented as short papers and discussions held at each workshop. The workshops were co-located with the I-ESA’12 Conference organized by the Polytechnic University of Valencia, Spain. Complementary to the conference program, the workshops aimed at exploiting new issues, challenges and solutions for Enterprise Interoperability. The scope of the workshops spanned a wide range of interoperability issues in Service Science and Innovation, Model Driven Interoperability, Service Oriented Architectures, Factories of the Future, Enterprise Networks and Management, SME Aspects and Standards.

Enterprises and organizations of any kind embedded in today's economic environment are deeply dependent on their ability to take part in collaborations. Consequently, it is strongly required for them to get actively involved for their own benefit in emerging, potentially opportunistic collaborative enterprise networks. The concept of “interoperability” has been defined by INTEROP-VLab as “The ability of an enterprise system or application to interact with others at a low cost in a flexible approach”. Consequently, interoperability of organizations appears as a major issue to succeed in building on the fly emerging enterprise networks. The International Conference on Interoperability for Enterprise Systems and Applications (I-ESA 2014) was held under the motto “interoperability for agility, resilience and plasticity of collaborations” on March 26-28, 2014 and organized by the Ecole des Mines d’Albi-Carmaux, France on behalf of the European Laboratory for Enterprise Interoperability (INTEROP-VLab). On March 24-25, co-located with the conference eight workshops and one doctoral symposium were held in four tracks complementing the program of the I-ESA’14 conference. The workshops and the doctoral symposium address areas of greatest current activity focusing on active discussions among the leading researchers in the area of Enterprise Interoperability. This part of the conference helps the community to operate effectively, building co-operative and supportive international links as well as providing new knowledge of on-going research to practitioners. The workshops and doctoral symposium aimed at exploiting new issues, challenges and solutions for Enterprise Interoperability (EI) and associated domains of innovation such as Smart Industry, Internet-Of-Things, Factories of the Future, EI Applications and Standardisation. These proceedings include the short papers from the I-ESA’14 workshops and the doctoral symposium. The book is split up into 9 sections, one for each workshop and one for the doctoral symposium. All sections were organized following four tracks: (1) EI and Future Internet / Factory of the Future; (2) EI Application Domains and IT; (3) EI Standards; (4) EI Doctoral Symposium. For each section, a workshop report is provided summarizing the content and the issues discussed during the sessions. The goal of the first track was to offer a discussion opportunity on interoperability issues regarding the use of Internet of Things on manufacturing environment (Workshops 1 and 3) on one hand, and regarding the potential of innovation derived from the use of digital methods, architectures and services such as Smart Networks (Workshops 2 and 4) on the other hand. The second track focused on particular application domains that are looking for innovative solutions to support their strong collaborative needs. Thus, the track developed one workshop on the use of EI solution for Future City-Logistics (Workshop 5) and one on the use of EI solutions for Crisis / Disaster Management (Workshop 6). The third track studied the recent developments in EI standardization. Two workshops were dedicated to this issue. The first one has proposed to focus on the management of standardization (Workshop 8) and the second one has chosen to work on the new knowledge on standardization developments in the manufacturing service domain (Workshop 9). The last track, the doctoral symposium presented research results from selected dissertations. The session discussed EI knowledge issues, notably in terms of gathering through social networks or Internet of Things and of exploitation through innovative decision support systems.

A unique guide to the design and implementation of simulation software This book offers a concise introduction to the art of building simulation software, collecting the most important concepts and algorithms in one place. Written for both individuals new to the field of modeling and simulation as well as experienced practitioners, this guide explains the design and implementation of simulation software used in the engineering of large systems while presenting the relevant mathematical elements, concept discussions, and code development. The book approaches the topic from the perspective of Zeigler's theory of modeling and simulation, introducing the theory's fundamental concepts and showing how to apply them to engineering problems. Readers will learn five necessary skills for building simulations of complicated systems: Working with fundamental abstractions for simulating dynamic systems Developing basic simulation algorithms for continuous and discrete event models Combining continuous and discrete event simulations into a coherent whole Applying strategies for testing a simulation Understanding the theoretical foundations of the modeling constructs and simulation algorithms The central chapters of the book introduce, explain, and demonstrate the elements of the theory that are most important for building simulation tools. They are bracketed by applications to robotics, control and communications, and electric power systems; these comprehensive examples clearly illustrate how the concepts and algorithms are put to use. Readers will explore the design of object-oriented simulation programs, simulation using multi-core processors, and the integration of simulators into larger software systems. The focus on software makes this book particularly useful for computer science and computer engineering courses in simulation that focus on building simulators. It is indispensable reading for undergraduate and graduate students studying modeling and simulation, as well as for practicing scientists and engineers involved in the development of simulation tools.

Artificial neural network (ANN) has proven to be a universal approximator for any non-linear continuous function with arbitrary accuracy. This book presents how to apply ANN to measure various software reliability indicators: number of failures in a given time, time between successive failures, fault-prone modules and development efforts. The application of machine learning algorithm i.e. artificial neural networks application in software reliability prediction during testing phase as well as early phases of software development process is presented as well. Applications of artificial neural network for the above purposes are discussed with experimental results in this book so that practitioners can easily use ANN models for predicting software reliability indicators.

There are many books on computers, networks, and software engineering but none that integrate the three with applications. Integration is important because, increasingly, software dominates the performance, reliability, maintainability, and availability of complex computer and systems. Books on software engineering typically portray software as if it exists in a vacuum with no relationship to the wider system. This is wrong because a system is more than software. It is comprised of people, organizations, processes, hardware, and software. All of these components must be considered in an integrative fashion when designing systems. On the other hand, books on computers and networks do not demonstrate a deep understanding of the intricacies of developing software. In this book you will learn, for example, how to quantitatively analyze the performance, reliability, maintainability, and availability of computers, networks, and software in relation to the total system. Furthermore, you will learn how to evaluate and mitigate the risk of deploying integrated systems. You will learn how to apply many models dealing with the optimization of systems. Numerous quantitative examples are provided to help you understand and interpret model results. This book can be used as a first year graduate course in computer, network, and software engineering; as an on-the-job reference for computer, network, and software engineers; and as a reference for these disciplines.