Introduction to Architectural Technology

Since the publication of the first edition of Architectural Technology, in 2002, there have been significant developments in the number of courses, the profile of the discipline as well as significant changes in the Construction sector. The Second edition of Architectural Technology addresses these challenges directly. Much greater emphasis is given to the three core themes of the book – Environmental Sustainability; Innovation; and Design. An increase in the visual material included reinforces the critical role of Design, aiding students to better translate conceptual designs into built artefacts. Building upon solid teaching practice from the previous edition, Architectural Technology is now more concisely structured to take the reader through the whole life cycle of a building, emphasising sustainability and building performance. Material on digital information, building information modelling (BIM) and information communication technologies has been updated. Most chapters have been re-titled to emphasise the importance of design and make the book more accessible to a wider range of students. Chapters conclude with updated/more extensive links to further reading. Architectural Technology, 2nd Edition: Bridges the knowledge gap between design and construction Tackles the core subjects of management, technologies and design from a sustainable building angle Addresses the buildability and performance of a design from a whole life perspective Thoroughly revised and updated this undergraduate level textbook is essential for Architectural Technology courses. Students studying Architectural Engineering, Architecture, Building Surveying; and more general Construction courses, will find the material invaluable.

Since the publication of the first edition of Architectural Technology, in 2002, there have been significant developments in the number of courses, the profile of the discipline as well as significant changes in the Construction sector. The Second edition of Architectural Technology addresses these challenges directly. Much greater emphasis is given to the three core themes of the book – Environmental Sustainability; Innovation; and Design. An increase in the visual material included reinforces the critical role of Design, aiding students to better translate conceptual designs into built artefacts. Building upon solid teaching practice from the previous edition, Architectural Technology is now more concisely structured to take the reader through the whole life cycle of a building, emphasising sustainability and building performance. Material on digital information, building information modelling (BIM) and information communication technologies has been updated. Most chapters have been re-titled to emphasise the importance of design and make the book more accessible to a wider range of students. Chapters conclude with updated/more extensive links to further reading. Architectural Technology, 2nd Edition: Bridges the knowledge gap between design and construction Tackles the core subjects of management, technologies and design from a sustainable building angle Addresses the buildability and performance of a design from a whole life perspective Thoroughly revised and updated this undergraduate level textbook is essential for Architectural Technology courses. Students studying Architectural Engineering, Architecture, Building Surveying; and more general Construction courses, will find the material invaluable.

This core textbook brings together for the first time the technical, legal, social and philosophical issues under the umbrella of architectural technology. Part 1 covers the influences that affect the way we build – the environmental agenda, the human factors, buildability, time and costs. Part 2 takes the reader through the life of a typical building project – from briefing, through design and assembly, to use and eventual disassembly. Part 3 tackles some of the underlying issues facing the architectural technologist – from the communication of details to technological innovation. Architectural Technolgy bridges the knowledge gap between design and construction, enabling the architectural technologist to apply their unique skill in a creative and innovative way. «As a textbook aimed at those studying for membership of BIAT this is clearly very thorough and has the recommendation of their Vice President Education. However, it can also justifiably earn its place on the bookshelf of anybody involved in the construction process as a reference and to aid an understanding of others he/she will be working with to develop an environment of which to be proud.» Building Engineer, July 2002

A sharp and lively text that covers issues in depth but not to the point that they become inaccessible to beginning students, An Introduction to Architectural Theory is the first narrative history of this period, charting the veritable revolution in architectural thinking that has taken place, as well as the implications of this intellectual upheaval. The first comprehensive and critical history of architectural theory over the last fifty years surveys the intellectual history of architecture since 1968, including criticisms of high modernism, the rise of postmodern and poststructural theory, critical regionalism and tectonics Offers a comprehensive overview of the significant changes that architectural thinking has undergone in the past fifteen years Includes an analysis of where architecture stands and where it will likely move in the coming years

An Introduction to Science and Technology Studies, Second Edition reflects the latest advances in the field while continuing to provide students with a road map to the complex interdisciplinary terrain of science and technology studies. Distinctive in its attention to both the underlying philosophical and sociological aspects of science and technology Explores core topics such as realism and social construction, discourse and rhetoric, objectivity, and the public understanding of science Includes numerous empirical studies and illustrative examples to elucidate the topics discussed Now includes new material on political economies of scientific and technological knowledge, and democratizing technical decisions Other features of the new edition include improved readability, updated references, chapter reorganization, and more material on medicine and technology

Contamination control is being used by more and more industries where the highest level of cleanliness and hygiene is of vital importance. This book covers the basic principles of contamination control and cleanroom technology from a holistic point of view. It deals with cleanliness and hygiene and their effects on the outcome of a process, reflecting the latest results from both scientific and practical points of view. The following topics are covered: contaminants and how they are measured cleanrooms and clean zones cleaning and decontamination cleanroom clothing the impact of people on cleanliness. Intended as an introduction to the area of contamination control, the text is also an excellent source of knowledge for people with both theoretical and practical experience. The Swedish version has been used for a long time within the Nordic countries as a basic training textbook within the pharmaceutical, microelectronics, food and beverage, optics and many other industries.

The perfect primer for both the layperson and the engineer, for the new hire and the old hand, describing, in easy-to-understand language, one of the biggest and most lucrative industries in the world. There is only one substance known to mankind that can cause wars, influence global economies, and make entire countries rich: petroleum. One teaspoon of the stuff carries enough energy to power a ton truck up a hill. It's in the news every single day, it influences our lives in ways that we cannot fathom, and it is the most important commodity in the world. But how much does the average person, even the average engineer, know about it? This book describes the petroleum industry, in easy-to-understand language, for both the layperson and engineer alike. From the economics of searching for oil and gas to the pitfalls of drilling and production, getting it out of the ground, into pipelines, into refineries, and, finally, into your gas tank, this book covers the petroleum industry like no other treatment before. There is coverage of pricing and the economics of this very important resource, as well, which is useful not only to engineers, but to economists and, really, anyone who uses it. From jet fuel to gasoline to natural gas and plastics, petroleum is one of the integral products of our lives. We are practically bathed it in from birth, our food is protected by it, and it even has healing properties. Learn all about this incredible substance and its fascinating history and highly debated future. An Introduction to Petroleum Technology, Economics, and Politics: Gives a thorough summary of the petroleum and natural gas industry, from prospect to production to pipeline New technologies, such as directional and underbalanced drilling, are covered, in easy-to-understand language Useful not only for newcomers and laypersons, but for engineers and students, particularly those for whom English is a second language Examines the basics of pricing and valuation

Microfabrication is the key technology behind integrated circuits, microsensors, photonic crystals, ink jet printers, solar cells and flat panel displays. Microsystems can be complex, but the basic microstructures and processes of microfabrication are fairly simple. Introduction to Microfabrication shows how the common microfabrication concepts can be applied over and over again to create devices with a wide variety of structures and functions. Featuring: * A comprehensive presentation of basic fabrication processes * An emphasis on materials and microstructures, rather than device physics * In-depth discussion on process integration showing how processes, materials and devices interact * A wealth of examples of both conceptual and real devices Introduction to Microfabrication includes 250 homework problems for students to familiarise themselves with micro-scale materials, dimensions, measurements, costs and scaling trends. Both research and manufacturing topics are covered, with an emphasis on silicon, which is the workhorse of microfabrication. This book will serve as an excellent first text for electrical engineers, chemists, physicists and materials scientists who wish to learn about microstructures and microfabrication techniques, whether in MEMS, microelectronics or emerging applications.

This book provides an invaluable introduction to his historical and conceptual engagement with sociology.

Introduction to Securitization outlines the basics of securitization, addressing applications for this technology to mortgages, collateralized debt obligations, future flows, credit cards, and auto loans. The authors present a comprehensive overview of the topic based on the experience they have gathered through years of interaction with practitioners and graduate students around the world. The authors offer coverage of such key topics as: structuring agency MBS deals and nonagency deals, credit enhancements and sizing, using interest rate derivatives in securitization transactions, asset classes securitized, operational risk factors, implications for financial markets, and applying securitization technology to CDOs. Finally, in the appendices, the authors provide an essential introduction to credit derivatives, an explanation of the methodology for the valuation of MBS/ABS, and the estimation of interest rate risk. Securitization is a financial technique that pools assets together and, in effect, turns them into a tradable security. The end result of a securitization transaction is that a corporation can obtain proceeds by selling assets and not borrowing funds. In real life, many securitization structures are quite complex and enigmatic for practitioners, investors, and finance students. Typically, books detailing this topic are either too lengthy, too technical, or too superficial in their presentation. Introduction to Securitization is the first to offer essential information on this topic at a fundamental, yet comprehensive level-providing readers with a working understanding of what has become one of today's most important areas of finance. Authors Frank Fabozzi and Vinod Kothari, internationally recognized experts in the field, clearly define securitization, contrast it with corporate finance, and explain its advantages. They carefully illustrate the structuring of asset-backed securities (ABS) transactions, including agency mortgage-backed securities (MBS) deals and nonagency deals, and show the use of credit enhancements and interest rate derivatives in such transactions. They review the collateral classes in ABS, such as retail loans, credit cards, and future flows, and discuss ongoing funding vehicles such as asset-backed commercial paper conduits and other structured vehicles. And they explain the different types of collateralized debt obligations (CDOs) and structured credit, detailing their structuring and analysis. To complement the discussion, an introduction to credit derivatives is also provided. The authors conclude with a close look at securitization's impact on the financial markets and the economy, with a review of the now well-documented problems of the securitization of one asset class: subprime mortgages. While questions about the contribution of securitization have been tainted by the subprime mortgage crisis, it remains an important process for corporations, municipalities, and government entities seeking funding. The significance of this financial innovation is that it has been an important form of raising capital for corporations and government entities throughout the world, as well as a vehicle for risk management. Introduction to Securitization offers practitioners and students a simple and comprehensive entry into the interesting world of securitization and structured credit.