TES-92 TES92 EMF Meter Triaxial Data Logger The Electromagnetic Radiation Detector TES92
Features:
Wireless LAN (Wi-Fi) detection, installation.
Spy camera, wireless bug finder.
Cellular/Cordless phone radiation safety level.
Microwave oven leakage detection.
Personal living environment EMF safety.
RF power measurement for transmitters.
High frequency (RF) electromagnetic wave field strength measurement.
Mobil phone base station antenna radiation power density measurement.
Wireless communication applications (CW , TDMA , GSM , DECT).
50 MHz to 3.5 GHz frequency range.
For isotropic measurements of electromagnetic fields.
Non-directional (isotropic ) measurement with three-channel measurement probe.
High dynamic range due to three-channel digital results processing.
Configurable alarm threshold and memory function.
Easy to use
Notes:Shipping company does not accept liquids and powders and dry batteries
ELECTRICAL SPECIFICATIONS
Sensor type
Electric field (E)
Frequency range
50MHz to 3.5 GHz
Directional characteristic
Isotropic, 3-dimensional
Measurement range (CW signal>50MHz)
38mV/m to 11V/m
Absolute error(@1V/m and 50MHz)
± 1.0dB
Frequency response (taking into account typ. CAL factor)
± 1.0dB (50MHz to 1.9 GHz) , ±2.4dB(1.9GHz to 35GHz)
Isotropy deviation
Type. ±1.0dB f>50 MHz
Overload limit
4.2W/m2 (40 V/m)
Temperature response(0 to 50 )
± 1.5dB
Note
Unless otherwise stated, all specifications hold under the following assumptions:
Sinusoidal signals; device in far-field of a source; probe head pointing toward source; ambient temperature +23 ±3 ;relative air humidity 25% to 75%.
GENERAL SPECIFICATIONS
Measurement method
Digital , triaxial measurement
Directional characteristic
Isotropic, triaxial
Measurement range selection
One continuous range
Display resolution
0.1mV/m, 0.1 μA/m, 0.1 μW/m², 0.001 μW/cm²
Setting time
Typically 1s ( 0 to 90% of meas. value)
Display refresh rate
Typically 400mS
Display type
LCD 4 digit
Audible alarm
Buzzer
Measurement units
mV/m , V/m , μA/m , mA/m , μW/m² , mW/m² , μW/cm²
Measurement display value
Instantaneous measured value, maximum value or average value since power-on.
Measurement average time (in per-set steps)
4s to 15 minutes
Measurement alarm function
Adjustable threshold with ON/OFF
Measurement calibration factor CAL
Adjustable
Manual data memory and read storage
99 sets ( only recall by meter )
Battery
9V
Battery life
>15 hours
Accessory
carrying case & manual
