Developments in Strategic Materials and Computational Design II, Volume 32, Issue 10

Ceramic Engineering and Science Proceedings Volume 34, Issue 10 – Developments in Strategic Materials and Computational Design IV A collection of 25 papers from The American Ceramic Society’s 37th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 27-February 1, 2013. This issue includes papers presented in the Geopolymers and Chemically Bonded Ceramics (Focused Session 1); Thermal Management Materials and Technologies (Focused Sessoin 2); and Materials for Extreme Environments: Ultrahigh Temperature Ceramics and Nano-laminated Ternary Carbides and Nitrides (MAX Phases) (Symposium 12).

Exploring the latest findings, new materials, and applications, this issue keeps readers current with some of the most important developments in strategic materials and the computational design of ceramics and composites. It features select contributions from one symposium and three focused sessions that took place in January 2012 during the 36th International Conference and Exposition on Advanced Ceramics and Composites (ICACC). This issue represents one of nine CESP issues published from the 36th ICACC meeting.

Contributions from three Focused Sessions that were part of the 34th International Conference on Advanced Ceramics and Composites (ICACC), in Daytona Beach, FL, January 24-29, 2010 are presented in this volume. The broad range of topics is captured by the Focused Session titles, which are listed as follows: FS1 – Geopolymers and other Inorganic Polymers; FS3 – Computational Design, Modeling Simulation and Characterization of Ceramics and Composites; and FS4 – Nanolaminated Ternary Carbides and Nitrides (MAX Phases). The session on Geopolymers and other Inorganic Polymers continues to attract growing attention from international researchers (USA, Australia, France, Germany, Italy, Czech Republic, and Viet Nam) and it is encouraging to see the variety of established and new applications being found for these novel and potentially useful materials. The session organizer gratefully acknowledges the support of the US Air Force Office of Scientific Research (AFOSR) through Dr. Joan Fuller. The AFOSR has continuously supported these conferences since the first meeting in Nashville, TN in 2003. Focused Session 3 was dedicated to design, modeling, simulation and characterization of ceramics and composites. 27 technical papers were presented on prediction of crystal structure and phase stability, characterization of interfaces and grain boundaries at atomic scale, optimization of electrical, optical and mechanical properties, modeling of defects and related properties, design of materials and components at different length scales, application of novel computational methods for processing. Four of these papers are included in this issue of CESP. Focused Session 4 was dedicated to MAX phases – a class of ternary carbides and nitrides with nanolaminated structure and general formula Mn+1AXn (where M is an early transition metal, A is an A-group element from IIIA to VIA, X is either C or N, and n=1, 2, 3 …). The MAX phases have attracted recently a lot of attention because they possess unique combination of metallic- and ceramic-like properties. In all, 30 technical papers were presented during this session. Four of these papers are included in this issue.

This volume provides a one-stop resource, compiling current research on developments in strategic materials. It is a collection of papers from The American Ceramic Society s 32nd International Conference on Advanced Ceramics and Composites, January 27-February 1, 2008. Papers included in this issue come from five symposia: «Thermoelectric Materials for Power Conversion;» «Basic Science of Multifunctional Ceramics;» «Science of Ceramic Interfaces;» «Geopolymers;» and «Materials for Solid State Lighting.» This is a valuable, up-to-date resource for researchers working in the field.

Contributions from three symposia that were part of the 34th International Conference on Advanced Ceramics and Composites (ICACC), in Daytona Beach, FL, January 24-29, 2010 are presented in this volume. The broad range of topics is captured by the symposia titles, which are listed as follows: International Symposium on Ceramics for Electric Energy Generation, Storage, and Distribution (debuted in 2010); Thermal Management Materials and Technologies (debuted in 2010); and lastly, and Advanced Sensor Technology, Developments and Applications (debuted in 2010). These new symposia emerged during this ICACC meeting due to community growth and interest, and thus each of these subject areas were established as stand-alone symposia. The current volume represents 15 contributions from the above listed symposia that embody the latest developments in engineering ceramics for energy technologies, thermal management utilizing either highly conductive or insulating materials, as well as advances regarding the utilization of ceramics for sensors.

With information on the subject of dielectric materials, this volume brings important updates to electronic device engineers and researchers in the area of ferroelectric materials. Topics include materials, processes, properties, and electronic devices based on these materials and systems. Proceedings of the symposium held at the 103rd Annual Meeting of The American Ceramic Society, April 22-25, 2001, in Indiana; Ceramic Transactions, Volume 131.

A collection of papers from The American Ceramic Society's 35th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 23-28, 2011. This issue includes papers presented in the 5th International Symposium on Nanostructured Materials and Nanotechnology on topics such as Nanotubes, Nanorods, Nanowires and other One-dimensional Structures; Nanostructured Membranes, Thin Films, and Functional Coatings; Synthesis, Functionalization and Processing of Nanostructured Materials; and Advanced Applications.

Ceramic Engineering and Science Proceedings Volume 34, Issue 7 – Nanostructured Materials and Nanotechnology VII A collection of 15 papers from The American Ceramic Society’s 37th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 27-February 1, 2013. This issue includes papers presented in the 7th International Symposium on Nanostructured Materials and Nanotechnology (Symposium 7) and Nanomaterials for Sensing Applications symposia (Focused Session 3).

This issue features fourteen peer-reviewed papers originating from The 6th International Symposium on Nanostructured Materials and Nanotechnology. It includes Nanostructured coatings by cluster beam deposition; a new greener synthetic route to cadmium/lead selenide and telluride nanoparticles; and much more. Held in January 2012, during the 36th International Conference on Advanced Ceramics and Composites (ICACC), the symposium covered a broad range of issues, including synthesis, processing, modeling, and structure-property correlations in nanomaterials and nanocomposites, enabling scientists, engineers, and technologists from around the world to explore the latest developments in the field.

This useful resource will help you understand the most valuable aspects of nanostructured materials and nanotechnology. Containing 16 peer-reviewed papers, this issue covers various aspects and the latest developments related to processing, modeling and manufacturing technologies of nanoscaled materials including CNT and clay-based composites, nanowire-based sensors, new generation photovoltaic cells, plasma processing of functional thin films, ceramic membranes and self-assembled functional nanostructures.