Micro and Nanostructured Epoxy / Rubber Blends

State-of-the-art overview on bioepoxy polymers as well as their blends and composites – covering all aspects from fundamentals to applications! Bioepoxy polymers is an emerging area and have attracted more and more attention due to their biodegradability and good thermo-mechanical performance. In recent years, research progress has been made in synthesis, processing, characterization, and applications of bioepoxy blends and composites. Bioepoxy polymers are very promising candidates to replace the traditional thermosetting nonbiodegradable polymers. Bio-Based Epoxy Polymers, Blends and Composites summaries recent research progress on bioepoxy polymers as well as their blends and composites. It covers aspects from synthesis, processing, various characterization techniques to broad spectrum of applications. It provides a correlation of physical properties with macro, micro and nanostructures of the materials. Moreover, research trends, future directions, and opportunities are also discussed. Attracts attention: Bioepoxy polymers are environmentally friendly and considered as a promising candidate to replace the traditional thermosetting nonbiodegradable polymers Highly application-oriented: Bioepoxy polymers can be used in a broad range of applications such as polymer foams, construction, aerospace, automobiles, self-healing systems One-stop reference: Covers all aspects of bioepoxy polymer, their blends and composites, such as synthesis, properties, processing, characterization and applications Broad audience: Attracts attention from both academia and industry

The Symposium on Nanostructured Materials and Systems was held during the 8th Pacific Rim Conference on Ceramic and Glass Technology (PACRIM 8) from May 31-June 5, 2009 in Vancouver, Canada. This symposium aimed to review the progress in the state-of-the-art of nanoscience and nanotechnology including synthesis, processing, modeling, applications and assessment of toxicological potential of nanomatter. More than 55 contributions (invited talks, oral presentations, and posters), were presented by participants, from all over the world, representing universities, research institutions, and industry which made this symposium an attractive forum for interdisciplinary presentations and discussions and to elaborate their functional diversity. This issue contains 16 peer-reviewed papers (invited and contributed) incorporating the latest developments related to synthesis, processing and manufacturing technologies of nanoscaled materials and systems including one-dimensional nanostructures, nanoparticle-based composites, electrospinning of nanofibers, functional thin films, ceramic membranes, bioactive materials and self-assembled functional nanostructures and nanodevices. These papers discuss several important aspects related to fabrication and engineering issues necessary for understanding and further development of processing and manufacturing of nanostructured materials and systems.

A collection of papers from The American Ceramic Society s 32nd International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 27-February 1, 2008. Topics include basic and applied research in nanomaterials such as synthesis, functionalization, processing, and characterization; structure-property correlations; bio- and magnetic nanomaterials; nanostructured materials for chemical mechanical planarization, display, health, and cosmetic applications; nanotubes and nanowires; and industrial development.

Optical waveguides take a prominent role in photonics because they are able to trap and to transport light efficiently between a point of excitation and a point of detection. Moreover, waveguides allow the management of many of the fundamental properties of light and allow highly controlled interaction with other optical systems. For this reason waveguides are ubiquitous in telecommunications, sensing, spectroscopy, light sources, and high power light delivery. Nanostructured and subwavelength waveguides have additional advantages; they are able to confine light at a length scale below the diffraction limit and enhance or suppress light-matter interaction, as well as manage fundamental properties of light such as speed and direction of energy and phase propagation. This book presents semi-analytical theory and practical applications of a large number of subwavelength and nanostructured optical waveguides and fibers operating in various regions of the electromagnetic spectrum including visible, near and mid-IR and THz. A large number of approximate, while highly precise analytical expressions are derived that describe various modal properties of the planar and circular isotropic, anisotropic, and metamaterial waveguides and fibers, as well as surface waves propagating on planar, and circular interfaces. A variety of naturally occurring and artificial materials are also considered such as dielectrics, metals, polar materials, anisotropic all-dielectric and metal-dielectric metamaterials. Contents are organized around four major themes: Guidance properties of subwavelength waveguides and fibers made of homogeneous, generally anisotropic materials Guidance properties of nanostructured waveguides and fibers using both exact geometry modelling and effective medium approximation Development of the effective medium approximations for various 1D and 2D nanostructured materials and extension of these approximations to shorter wavelengths Practical applications of subwavelength and nanostructured waveguides and fibers Nanostructured Subwavelengths and Waveguides is unique in that it collects in a single place an extensive range of analytical solutions which are derived in various limits for many practically important and popular waveguide and fiber geometries and materials.

The book identifies new nanometric architectures that would be of particular interest for applications and the technological route to reach them. Nano-architectures of interest are for optical, electrical, magnetic, mechanical properties and reactivity as well as for specific applications such as catalysis and medical diagnostic and drug delivery. Nano-architectures would be metals, alloys, ceramics, semi-conductors, polymers or hybrids inorganic-polymers materials. The book places special emphasis on crucial technical aspects of the fabrication, the control and the characterisation of complex nano-architectures.

There have been extraordinary developments in nanomaterials in the past two decades. Nanomaterial processing is one of the key components for this success. This volume, titled Processing of Nanoparticle Materials and Nanostructured Films, is a collection of the papers presented at Controlled Processing of Nanoparticle-based Materials and Nanostructured Films symposium held during the Materials Science and Technology 2009 conference (MS&T’09), October 25-29, 2009 in Pittsburgh, PA. It summarizes the progress that has been achieved most recently in understanding and processing nanoparticle-based materials and nanostructured films. Nanoparticle-based materials and nanostructured films hold great promise to enable a broad range of new applications. This includes high energy conversion efficiency fuel cells, smart materials, high performance sensors, and structural materials under extreme environments. However, many barriers still exist in understanding and controlling the processing of nanoparticle-based materials and nanostructured films. In particular, agglomeration must be controlled in powder synthesis and processing to enable the fabrication of homogeneous green or composite microstructures, and microstructure evolution must be controlled to preserve the size and properties of the nanostructures in the finished materials. Also, novel nanostructure designs are highly needed at all stages of bulk and thin film nanomaterial formation process to enable unique performances, low cost, and green engineering. This volume focuses on three general topics, 1) Processing to preserve and improve nanoscale size, structure, and properties, 2) Novel design and understanding of new nanomaterials, such as new synthesis approaches, templating, and 3D assembly technologies, and 3) Applications of nanoparticle assemblies and composites and thin films.

Advances in nanotechnology offer great new promise in new multifunctional systems that experts predict to be a major economic force within the next decade. Ceramic materials enable new developments in such areas as electronics and displays, portable power systems and personnel protection. This issue will present the results of current basic and applied research and potential commercial applications. This book is comprised of papers from the Proceedings of the 30th International Conference on Advanced Ceramics and Composites, January 22-27, 2006, Cocoa Beach, Florida. Organized and sponsored by The American Ceramic Society and The American Ceramic Society's Engineering Ceramics Division in conjunction with the Nuclear and Environmental Technology Division.

Because it is critically important to manufacture quality products, a reasonable balance must be drawn between control requirements and parameters for improved processing method with respect to plastics additives. An important contribution to the commercial polymer industry, Polymer Blends and Composites is one of the first books to combine plastics additives, testing, and quality control. The book is a comprehensive treatise on properties that provides detailed guidelines for selecting and using blends and composites for applications. A valuable resource for operators, processors, engineers, chemists, the book serves to stimulate those already active in natural polymer composites.

The book focusses on the recent technical research accomplishments in the area of polyethylene-based blends, composites and nanocomposites by looking at the various aspects of processing, morphology, properties and applications. In particular, the book details the important developments in areas such as the structure-properties relationship of polyethylene; modification of polyethylene with radiation and ion implantation processes; stabilization of irradiated polyethylene by the introduction of antioxidants; reinforcement of polyethylene through carbon-based materials as additives; characterization of carbon-based polyethylenes composites, polyethylene-based blends with thermoplastic and thermoset; characterization of polyethylene-based thermoplastic and thermoset blends; polyethylene-based blends with natural rubber and synthetic rubber; characterization of polyethylene-based natural rubber and synthetic rubber blends; characterization of polyethylene-based composites.

Membranes have emerged over the last 30 years as a viable water treatment technology. Earth's population is growing and the need for alternative ways to generate potable water is rising. The recent advent of nanotechnology opens the door to improving processes in membrane technology, which is a promising step on the way to solving the earth's potable water problem. Current performance is enhanced and new concepts are possible by engineering on the nanoscale. This book presents key areas of nanotechnology such as fouling tolerant and robust membranes, enhanced destruction of pollutants and faster monitoring of water quality. 'Functional Nanostructured Materials and Membranes for Water Treatment' is part of the series on Materials for Sustainable Energy and Development edited by Prof. G.Q. Max Lu. The series covers advances in materials science and innovation for renewable energy, clean use of fossil energy, and greenhouse gas mitigation and associated environmental technologies.