Модуль Fujitsu TFM for FBU on PRAID EP420i/e (S26361-F5243-L200)

Prevention, preparedness, response and recovery–the key components of emergency planning–form the major sections of this work. The book first describes PSM (Process Safety Management) as the key to prevention, then goes on to consider the main features of a preparedness program, including recognizing credible incidents, planning practical strategy to deal with these incidents, selecting necessary physical support systems and equipment, and developing a complete emergency response plan. The Response section presents the functions implemented during an actual emergency and concludes with a section on managing cleanup and restoration of operations. The many tables and figures include Sample Incident Command System Plans for both large and small organizations, OSHA and EPA regulations affecting planning, sample Fire Emergency Action Levels, HAZMAT Responder Levels, and OSHA Emergency Training Requirements.

Dr Donald Bailey starts with introductory material considering the problem of embedded image processing, and how some of the issues may be solved using parallel hardware solutions. Field programmable gate arrays (FPGAs) are introduced as a technology that provides flexible, fine-grained hardware that can readily exploit parallelism within many image processing algorithms. A brief review of FPGA programming languages provides the link between a software mindset normally associated with image processing algorithms, and the hardware mindset required for efficient utilization of a parallel hardware design. The design process for implementing an image processing algorithm on an FPGA is compared with that for a conventional software implementation, with the key differences highlighted. Particular attention is given to the techniques for mapping an algorithm onto an FPGA implementation, considering timing, memory bandwidth and resource constraints, and efficient hardware computational techniques. Extensive coverage is given of a range of low and intermediate level image processing operations, discussing efficient implementations and how these may vary according to the application. The techniques are illustrated with several example applications or case studies from projects or applications he has been involved with. Issues such as interfacing between the FPGA and peripheral devices are covered briefly, as is designing the system in such a way that it can be more readily debugged and tuned. Provides a bridge between algorithms and hardware Demonstrates how to avoid many of the potential pitfalls Offers practical recommendations and solutions Illustrates several real-world applications and case studies Allows those with software backgrounds to understand efficient hardware implementation Design for Embedded Image Processing on FPGAs is ideal for researchers and engineers in the vision or image processing industry, who are looking at smart sensors, machine vision, and robotic vision, as well as FPGA developers and application engineers. The book can also be used by graduate students studying imaging systems, computer engineering, digital design, circuit design, or computer science. It can also be used as supplementary text for courses in advanced digital design, algorithm and hardware implementation, and digital signal processing and applications. Companion website for the book: www.wiley.com/go/bailey/fpga

Dr Donald Bailey starts with introductory material considering the problem of embedded image processing, and how some of the issues may be solved using parallel hardware solutions. Field programmable gate arrays (FPGAs) are introduced as a technology that provides flexible, fine-grained hardware that can readily exploit parallelism within many image processing algorithms. A brief review of FPGA programming languages provides the link between a software mindset normally associated with image processing algorithms, and the hardware mindset required for efficient utilization of a parallel hardware design. The design process for implementing an image processing algorithm on an FPGA is compared with that for a conventional software implementation, with the key differences highlighted. Particular attention is given to the techniques for mapping an algorithm onto an FPGA implementation, considering timing, memory bandwidth and resource constraints, and efficient hardware computational techniques. Extensive coverage is given of a range of low and intermediate level image processing operations, discussing efficient implementations and how these may vary according to the application. The techniques are illustrated with several example applications or case studies from projects or applications he has been involved with. Issues such as interfacing between the FPGA and peripheral devices are covered briefly, as is designing the system in such a way that it can be more readily debugged and tuned. Provides a bridge between algorithms and hardware Demonstrates how to avoid many of the potential pitfalls Offers practical recommendations and solutions Illustrates several real-world applications and case studies Allows those with software backgrounds to understand efficient hardware implementation Design for Embedded Image Processing on FPGAs is ideal for researchers and engineers in the vision or image processing industry, who are looking at smart sensors, machine vision, and robotic vision, as well as FPGA developers and application engineers. The book can also be used by graduate students studying imaging systems, computer engineering, digital design, circuit design, or computer science. It can also be used as supplementary text for courses in advanced digital design, algorithm and hardware implementation, and digital signal processing and applications. Companion website for the book: www.wiley.com/go/bailey/fpga

Provides structural engineers with the knowledge and practical tools needed to perform structural designs for wind that incorporate major technological, conceptual, analytical and computational advances achieved in the last two decades. With clear explanations and documentation of the concepts, methods, algorithms, and software available for accounting for wind loads in structural design, it also describes the wind engineer's contributions in sufficient detail that they can be effectively scrutinized by the structural engineer in charge of the design. Wind Effects on Structures: Modern Structural Design for Wind, 4th Edition is organized in four sections. The first covers atmospheric flows, extreme wind speeds, and bluff body aerodynamics. The second examines the design of buildings, and includes chapters on aerodynamic loads; dynamic and effective wind-induced loads; wind effects with specified MRIs; low-rise buildings; tall buildings; and more. The third part is devoted to aeroelastic effects, and covers both fundamentals and applications. The last part considers other structures and special topics such as trussed frameworks; offshore structures; and tornado effects. Offering readers the knowledge and practical tools needed to develop structural designs for wind loadings, this book: Points out significant limitations in the design of buildings based on such techniques as the high-frequency force balance Discusses powerful algorithms, tools, and software needed for the effective design for wind, and provides numerous examples of application Discusses techniques applicable to structures other than buildings, including stacks and suspended-span bridges Features several appendices on Elements of Probability and Statistics; Peaks-over-Threshold Poisson-Process Procedure for Estimating Peaks; estimates of the WTC Towers’ Response to Wind and their shortcomings; and more Wind Effects on Structures: Modern Structural Design for Wind, 4th Edition is an excellent text for structural engineers, wind engineers, and structural engineering students and faculty.

"Aswath Damodaran is simply the best valuation teacher around. If you are interested in the theory or practice of valuation, you should have Damodaran on Valuation on your bookshelf. You can bet that I do." – Michael J. Mauboussin, Chief Investment Strategist, Legg Mason Capital Management and author of More Than You Know: Finding Financial Wisdom in Unconventional Places In order to be a successful CEO, corporate strategist, or analyst, understanding the valuation process is a necessity. The second edition of Damodaran on Valuation stands out as the most reliable book for answering many of today?s critical valuation questions. Completely revised and updated, this edition is the ideal book on valuation for CEOs and corporate strategists. You'll gain an understanding of the vitality of today?s valuation models and develop the acumen needed for the most complex and subtle valuation scenarios you will face.

This title provides the current clarified Statements on Standards for Attestation Engagements (SSAEs) and related interpretations in a codified format, providing accountants with the most up-to-date information needed to perform attestation engagements. This authoritative guidance, issued directly by the AICPA, is essential to fully understanding the requirements associated with an attestation engagement. In addition to SSAE No. 18, Attestation Standards: Clarification and Recodification, which is now effective, this edition includes the following new standard: Interpretation No. 4, “Performing and Reporting on an Attestation Engagement Under Two Sets of Attestation Standards,” of AT-C section 105, Concepts Common to All Attestation Engagements This codification is fully indexed and arranged by subject. The codified standards and related interpretations are vital to practitioners performing attestation engagements.

2U Riser card for PCI-E slot 3 (PCI-E x8 FHHL) if CPU < 165W Optional 2U Riser card for PCI-E slot 3 (PCI-E x8 FHHL) if CPU < 165W

This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.

A comprehensive look at the impact of technology on facility managers Facility managers are tasked with operating and maintaining the built environment. Technology plays a big role in this function, and often facility managers are asked to install, implement, and work with a variety of technologies without any prior experience in information technology. Technology for Facility Managers presents the cutting-edge technology that facility managers will come across in their careers. Each chapter covers a different technology and includes an overview and basic primer about the technology—the current use of the technology, how it's evolving, and how it will impact the practice of facility management in the future—and is complemented with case studies that address how the technology was implemented and the effect it had on the organization. Technologies covered include: Building information modeling (BIM) Building automation systems (BAS) FM automation (CAFM/IWMS) Condition assessment/life cycle analysis Radio frequency identification (RFID) Geographic information systems (GIS) Social networking Sustainability and energy analysis Information and communications technology (ICT) Workflow technology that supports standards such as Business Process Modeling Notation (BPMN) and those developed by the Workflow Management Coalition (WfMC) Technology for Facility Managers is appropriate as a textbook for IFMA Accredited Degree Programs and as a resource for professionals studying for certification through IFMA.