Monitoring and Visualizing Membrane-Based Processes

The book examines the possibility of integrating different membrane unit operations (microfiltration, ultrafiltration, nanofiltration, reverse osmosis, electrodialysis and gas separation) in the same industrial cycle or in combination with conventional separation systems. It gives careful analysis of the technical aspects, and the possible fields of industrial development. The book reviews many original solutions in water desalination, agro-food productions and wastewater treatments, highlighting the advantages achievable in terms of product quality, compactness, rationalization and optimization of productive cycles, reduction of environmental impact and energy saving. Also included are examples of membrane reactors and their integration with a fuel cell; polymeric membranes in the integrated gasification combined cycle power plants; integrating a membrane reformer into a solar system; and potential application of membrane integrated systems in the fusion reactor fuel cycle. With detailed analysis and broad coverage, the book is divided into two sections: Bio-applications and Inorganic Applications.

Separation processes are challenging steps in any process industry for isolation of products and recycling of reactants. Membrane technology has shown immense potential in separation of liquid and gaseous mixtures, effluent treatment, drinking water purification and solvent recovery. It has found endless popularity and wide acceptance for its small footprint, higher selectivity, scalability, energy saving capability and inherent ease of integration into other unit operations. There are many situations where the target component cannot be separated by distillation, liquid extraction, and evaporation. The different membrane processes such as pervaporation, vapor permeation and membrane distillation could be used for solving such industrial bottlenecks. This book covers the entire array of fundamental aspects, membrane synthesis and applications in the chemical process industries (CPI). It also includes various applications of pervaporation, vapor permeation and membrane distillation in industrially and socially relevant problems including separation of azeotropic mixtures, close-boiling compounds, organic–organic mixtures, effluent treatment along with brackish and seawater desalination, and many others. These processes can also be applied for extraction of small quantities of value-added compounds such as flavors and fragrances and selective removal of hazardous impurities, viz., volatile organic compounds (VOCs) such as vinyl chloride, benzene, ethyl benzene and toluene from industrial effluents. Including case studies, this is a must-have for any process or chemical engineer working in the industry today. Also valuable as a learning tool, students and professors in chemical engineering, chemistry, and process engineering will benefit greatly from the groundbreaking new processes and technologies described in the volume.

Monitoring is a major component of management of chronic diseases such as diabetes, cardiovascular disease, arthritis and depression. Yet poor monitoring means healthcare costs are rising. This book discusses how monitoring principles adopted in other spheres such as clinical pharmacology and evidence-based medicine can be applied to chronic disease in the global setting. With contributions from leading experts in evidence-based medicine, it is a ground-breaking text for all involved in delivery of better and more effective management of chronic illnesses.

An integrated approach to fractals and point processes This publication provides a complete and integrated presentation of the fields of fractals and point processes, from definitions and measures to analysis and estimation. The authors skillfully demonstrate how fractal-based point processes, established as the intersection of these two fields, are tremendously useful for representing and describing a wide variety of diverse phenomena in the physical and biological sciences. Topics range from information-packet arrivals on a computer network to action-potential occurrences in a neural preparation. The authors begin with concrete and key examples of fractals and point processes, followed by an introduction to fractals and chaos. Point processes are defined, and a collection of characterizing measures are presented. With the concepts of fractals and point processes thoroughly explored, the authors move on to integrate the two fields of study. Mathematical formulations for several important fractal-based point-process families are provided, as well as an explanation of how various operations modify such processes. The authors also examine analysis and estimation techniques suitable for these processes. Finally, computer network traffic, an important application used to illustrate the various approaches and models set forth in earlier chapters, is discussed. Throughout the presentation, readers are exposed to a number of important applications that are examined with the aid of a set of point processes drawn from biological signals and computer network traffic. Problems are provided at the end of each chapter allowing readers to put their newfound knowledge into practice, and all solutions are provided in an appendix. An accompanying Web site features links to supplementary materials and tools to assist with data analysis and simulation. With its focus on applications and numerous solved problem sets, this is an excellent graduate-level text for courses in such diverse fields as statistics, physics, engineering, computer science, psychology, and neuroscience.

Without doubt the best modern and up-to-date text on the topic, wirtten by one of the world leading experts in the field. Should be on the desk of any practitioner or researcher involved in the field of Machine Condition Monitoring Simon Braun, Israel Institute of Technology Explaining complex ideas in an easy to understand way, Vibration-based Condition Monitoring provides a comprehensive survey of the application of vibration analysis to the condition monitoring of machines. Reflecting the natural progression of these systems by presenting the fundamental material and then moving onto detection, diagnosis and prognosis, Randall presents classic and state-of-the-art research results that cover vibration signals from rotating and reciprocating machines; basic signal processing techniques; fault detection; diagnostic techniques, and prognostics. Developed out of notes for a course in machine condition monitoring given by Robert Bond Randall over ten years at the University of New South Wales, Vibration-based Condition Monitoring: Industrial, Aerospace and Automotive Applications is essential reading for graduate and postgraduate students/ researchers in machine condition monitoring and diagnostics as well as condition monitoring practitioners and machine manufacturers who want to include a machine monitoring service with their product. Includes a number of exercises for each chapter, many based on Matlab, to illustrate basic points as well as to facilitate the use of the book as a textbook for courses in the topic. Accompanied by a website www.wiley.com/go/randall housing exercises along with data sets and implementation code in Matlab for some of the methods as well as other pedagogical aids. Authored by an internationally recognised authority in the area of condition monitoring.

The comprehensive reference on modern techniques and methods for monitoring and inspecting corrosion Strategic corrosion inspection and monitoring can improve asset management and life cycle assessment and optimize operational budgets. Advances in computer technologies and electronics have led to very efficient tools for monitoring and inspecting corrosion, including impedance spectroscopy, electrical field signatures, acoustic emissions, and radiographs. This up-to-date reference explains both intrusive and non-intrusive methods of measuring corrosion rates. It covers: The impact of corrosion on the economy and the safe operation of systems in diverse operational environments The various forms of corrosion, with a focus on the detectability of corrosion damage in the real world The principles of risk-based inspection and various risk assessment methodologies (HAZOP, FMECA, FTA, and ETA), with examples from industry The monitoring of microbiologically induced corrosion (MIC), cathodic protection (CP) systems, and atmospheric corrosion Non-destructive evaluation (NDE) techniques, including visual, ultrasonic, radiographic, electromagnetic, and thermographic inspection Roadmaps used by various industries and organizations for carrying out complex inspection and monitoring schedules Complete with graphics and illustrations, this is the definitive reference for professionals involved in the maintenance of industrial systems and structures, from oil exploration to chemical plants and infrastructures; consultants; property managers; and civil, materials, and construction engineers.

“… the best handbook on membrane technology, which is currently on the market… ” –Membrane News (on the previous edition) Building on the success of the previous edition, Membrane Technology and Applications Third Edition provides a comprehensive overview of separation membranes, their manufacture and their applications. Beginning with a series of general chapters on membrane preparation, transport theory and concentration polarization, the book then surveys several major areas of membrane application in separate chapters. Written in a readily accessible style, each chapter covers its membrane subject thoroughly, from historical and theoretical backgrounds through to current and potential applications. Topics include reverse osmosis, ultrafiltration, pervaporation, microfiltration, gas separation and coupled and facilitated transport; chapters on electrodialysis and medical applications round out the coverage. NEW TO THE THIRD EDITION New sections on the use of membranes in the chlor-alkali industry, membrane distillation, pressure retarded osmosis and constant flux-variable pressure ultrafiltration Zeolite and ceramic membranes, submerged membrane modules, and fuel cell membranes Substantially enhanced chapters on ultrafiltration, pervaporation and membrane contactors Updates to every chapter to reflect the developments in the field

This volume compiles essential contributions to the most innovative fields of Plasma Processes and Polymers. High-quality contributions cover the fields of plasma deposition, plasma treatment of polymers and other organic compounds, plasma processes under partial vacuum and at atmospheric pressure, biomedical, textile, automotive, and optical applications as well as surface treatment of bulk materials, clusters, particles and powders. This unique collection of refereed papers is based on the best contributions presented at the 16th International Symposium on Plasma Chemistry in Taormina, Italy (ISPC-16, June 2003). A high class reference of relevance to a large audience in plasma community as well as in the area of its industrial applications.

This A to Z guide to membrane science, technology, and applications provides comprehensive coverage of membrane preparation, modules, and transport theory. Highly illustrated with comprehensive and current reference listings, the resource provides practical uses and how-to's for a broad range of application areas. Single author work presenting a unified treatment Comprehensive coverage of membrane preparation, modules and transport theory A 'how-to' book giving practical advice Highly illustrated with comprehensive and current reference listings